plug & play ? systems mt-rj connector trunks a lanscape ? solutions product corning cable systems mt-rj adapter mt-rj connector (no pins) mm=97 sm=98 mt-rj connector (with pins) mm=86 sm=87 rear of patch panel front of patch panel trunk patch cord mic furcation: w/mt-rj 39" (+3" / -0") 900 m legs epoxy plug mt-rj pinned connector drawing cpc-220_6_17/16 unitized mic cable furcation (36, 48, 72, 96, and 144 fibers) drawing cpc-220_6_19 mic ? cable furcation (12 and 24 fibers) drawing cpc-220_6_18 umic furcation: 36-fibers with scupc connectors installed 39" (+3" / -0") 900 m legs epoxy plug mic w/interlocking armor w/mt-rj 39" (+3" / -0") 900 m legs epoxy plug ground wire 35" interlocking armored mic cable (12, 24, and 36 fibers) drawing cpc-220_6_20
corning cable systems fiber cabling solutions for premises networks corning cable systems llc ? po box 489 ? hickory, nc 28603-0489 usa 1-800-743-2675 ? fax:828-901-5973 ? international: 828-901-5000 http://www.corning.com/cablesystems ? corning cable systems reserves the right to improve, enhance, and modify the features and specifications of corning cable systems products without prior notification. lanscape and mic are regis- tered trademarks of corning cable systems brands, inc. plug & play is a trademark of corning cable systems brands, inc. infinicor is a registered trademark of corning incorporated. all other trademarks are the properties of their respective owners. corning cable systems is iso 9001 certified. ? 2001 corning cable systems. all rights reserved. printed in usa. lan.269.en / november 2001 / 1.425m plug & play ? systems mt-rj connector trunks a lanscape ? solutions product app grip fiber count cable type cable length hardware type fiber type grip end hardware end connectors 1 2 3 4 6 7 8 5 please use the following options to construct the part number. 5 select fiber type. k = 62.5/125 m infinicor ? 300 c = 50/125 m infinicor 600 r = single-mode 6 select cable type. 88 = mic ? plenum cable ap = mic interlocking armored plenum cable (12, 24, 36 fibers) 7 select hardware type. c1 = cch 01u c2 = cch 02u c3 = cch 03u c4 = cch 04u h2 = wch 02p h4 = wch 04p h6 = wch 06p h8 = wch 08p ht= wch 12p 00 = no hardware 8 select cable length in feet. standard cable lengths available up to 500 feet in five foot increments. longer cable lengths are subject to greater lead times. assembly lengths are measured from furcation plug-to-furcation plug. note: alternative cable options are subject to greater lead times. product specifications minimum fiber grip duct space count size requirement 12 to 72 2.0 in 2.5 in 96 to 144 2.7 in 4.0 in 1 select application and grip. a= connectorized cable connectors: both ends grip: one end hardware: none b= jumper (with grip both ends) connectors: both ends grip: both ends hardware: none p= plug & play system connectors: both ends grip: one end hardware: hardware end only 2 select connector type on grip end. single-mode connectors 87 = mt-rj pinned* multimode connectors 86 = mt-rj pinned* *note: most plug & play applications are for backbone cabling and will require a pinned mt-rj connector. if non-pinned connectors are required, please contact customer service. 3 select connector type on hardware end. single-mode connectors 87 = mt-rj pinned* multimode connectors 86 = mt-rj pinned* *note: most plug & play applications are for backbone cabling and will require a pinned mt-rj connector. if non-pinned connectors are required, please contact customer service. 4 select standard fiber count. 12 = 12-fiber 24 = 24-fiber 36 = 36-fiber 48 = 48-fiber 72 = 72-fiber 96 = 96-fiber e4 = 144-fiber
|
